Isolation Distribution Transformer

Isolation Distribution Transformer Price And Quantity

• Minimum Order Quantity 1 Unit

• Enclosure Indoor / Outdoor, IP23/IP55
• Impedance 4% (as specified)
• Dielectric Strength AC 28kV for 1 min
• Mounting Type Floor Mounted
• Winding Type Double Wound, Separate Winding
• Tapping Range 5%
• No Load Loss As per IS 2026
• Overload Capacity 120% for 2 hours
• Protection Overload, Short Circuit, Earth Fault, Surge Protection
• Connection Type Dyn11 (Standard)
• Paint Finish Epoxy Coated / Powder Coated
• Noise Level <60 dB
• Insulation Class Class F / H

Isolation Distribution Transformer Product Specifications

• Cooling Type AN (Air Natural) / ONAN (Oil Natural Air Natural)
• Output Product wise
• Product Type Isolation Distribution Transformer
• Power Scope Upto 500 kVA
• Material Copper
• Dimension (L*W*H) 1200 mm x 900 mm x 1500 mm (varies per rating)
• Efficiency 99.9%
• Coil Number Double Winding
• Coil Structure Toroidal / Layer Wound
• Load Loss As per IS Standard, typically < 2%
• Frequency (MHz) 50 Hertz (HZ)
• High Voltage Up to 11,000 V
• Weight Approx. 800 kg (varies per rating)
• Standard IS 2026 / IEC 60076
• Capacity 100 kVA to 500 kVA
• Phase Three Phase
• Operating Temperature Up to 45C ambient
• Rated Voltage 11 kV
• Usage Industrial, Electrical Power Distribution, Sensitive Equipment Protection
• Low Voltage 415 V / 433 V
• Coil Material Electrolytic Grade Copper

• Enclosure Indoor / Outdoor, IP23/IP55
• Impedance 4% (as specified)
• Dielectric Strength AC 28kV for 1 min
• Mounting Type Floor Mounted
• Winding Type Double Wound, Separate Winding
• Tapping Range 5%
• No Load Loss As per IS 2026
• Overload Capacity 120% for 2 hours
• Protection Overload, Short Circuit, Earth Fault, Surge Protection
• Connection Type Dyn11 (Standard)
• Paint Finish Epoxy Coated / Powder Coated
• Noise Level <60 dB
• Insulation Class Class F / H

Isolation Distribution Transformer Trade Information

• Supply Ability 100 Unit Per Month
• Delivery Time 2-3 Months